John Veteran Posted June 2, 2004 Veteran Share Posted June 2, 2004 This thread is'nt a place for discussion about these betas, I'm making this thread soley to help those who are having a problem with WMP 10 after installing a newer build of SP2. If you installed WMP 10 and then uninstalled SP2 to install a newer build of SP2 and WMP 10 now looks like WMP 9, this thread is for you. Warning: I don't guarantee this will work but logically it should and it has worked for both bangbang023 and myself. I have no idea if this will work on longhorn, Server 2003, Windows XP 64 bit edition, or anything else besides Windows XP 32 bit. To keep it short and simple, I'm not going to go through all the history of what builds I was using and why, because I honestly think this behavior will be the same across all builds. If it's not, by all means, please inform me. Before you begin, note that you should not open WMP at all until you're told. Doing so could cause problems and you might have to start over. Also note that I haven't thoroughly tested this, but as I said, it has worked for me and bangbang023. Here's the instructions to get WMP back to version 10 beta: 1. Extract the contents of the WMP10 installer to a folder, say "C:\WMP10" for ease of use. 2. In this folder, select all the INF files except WMP10.INF. Right click all these files and choose "Install". This process will take a few minutes because you're installing several INFs at once. 3. When step 2 is finished, right click WMP10.INF and choose Install. 4. If you get a message asking you to reboot, do so. 5. Finally, navigate to "HKEY_LOCAL_MACHINE\Microsoft\Software\MediaPlayer\Setup\Installed Versions". There should be three binary values: wmp.dll wmplayer.exe wmploc.dll Set ALL of these values to the value "00 00 0A 00 91 0D 00 00". 6. Open WMP and you should be using WMP10 beta (Y) For those of you who are lazy, I have attached a registry file that you may import in place of step 5. WMP_10_fix.regFetching info... Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/ Share on other sites More sharing options...
bangbang023 Veteran Posted June 2, 2004 Veteran Share Posted June 2, 2004 thanks to gameguy for this. He put alot of hard work into fixing the conflict. Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2207795 Share on other sites More sharing options...
cal2002 Posted June 2, 2004 Share Posted June 2, 2004 Does running c:\windows\inf\unregmp2.exe /UpdateWMP not work? Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2207803 Share on other sites More sharing options...
TheLegendOfMart Posted June 2, 2004 Share Posted June 2, 2004 Or he copied and pasted from a forum, i got the exact same instructions from a 64bit forum. Good info all the same. Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2207804 Share on other sites More sharing options...
John Veteran Posted June 2, 2004 Author Veteran Share Posted June 2, 2004 cal2002 said: Does running c:\windows\inf\unregmp2.exe /UpdateWMP not work? I don't know, I didn't know about that file until you mentioned it. Plus I'm more into manual fixes anyway :p If someone gets this to work before they use my solution, please say so (Y) Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2207819 Share on other sites More sharing options...
John Veteran Posted June 2, 2004 Author Veteran Share Posted June 2, 2004 Oneill said: Or he copied and pasted from a forum, i got the exact same instructions from a 64bit forum.Good info all the same. :o Where? I swear I made this myself. Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2207822 Share on other sites More sharing options...
bangbang023 Veteran Posted June 2, 2004 Veteran Share Posted June 2, 2004 Oneill said: Or he copied and pasted from a forum, i got the exact same instructions from a 64bit forum.Good info all the same. uh no, he wrote these from scratch. Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2207826 Share on other sites More sharing options...
TheLegendOfMart Posted June 2, 2004 Share Posted June 2, 2004 http://forums.planetamd64.com/viewtopic.ph...05fd6ff6f1e18b9 Posted at 8pm. Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2207841 Share on other sites More sharing options...
bangbang023 Veteran Posted June 2, 2004 Veteran Share Posted June 2, 2004 well I knwo for a fact he didn't copy and paste those. I was talking to him while he was figuring everything out. Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2207857 Share on other sites More sharing options...
TheLegendOfMart Posted June 2, 2004 Share Posted June 2, 2004 Fair enough Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2207864 Share on other sites More sharing options...
John Veteran Posted June 2, 2004 Author Veteran Share Posted June 2, 2004 He did that 2 hours ago, Ok, I see your point. But my instructions are different from his. He says copy all the dll files to \windows\syswow64, I said install the INFs. Also, the registry key is different. I'm sorry, but I don't see how you think I copied them. His solution probably works on XP 64bit, whereas mine might not. I did all the work in this thread myself, I just didn't have time to test it because I don't have several different OSes installed. Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2207875 Share on other sites More sharing options...
IanD Posted June 2, 2004 Share Posted June 2, 2004 rofl, gameguy does not copy stuff.. trust me, ive seen alot of his work.. its all original.. BTW, nice fix ;) Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2207890 Share on other sites More sharing options...
Batfink Posted June 2, 2004 Share Posted June 2, 2004 Yeah I can confirm this issue and I am adding this to the SP2 Thread!! Well in Gameguy Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2207908 Share on other sites More sharing options...
bsndabmb Posted June 3, 2004 Share Posted June 3, 2004 Great job gameguy. I tried this method with Longhorn 4074 and it worked as well!!! :D :D Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2208789 Share on other sites More sharing options...
PnP Posted June 3, 2004 Share Posted June 3, 2004 Thanks you so much for the resolution of this problem :) Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2210160 Share on other sites More sharing options...
alphatesterusa Posted June 4, 2004 Share Posted June 4, 2004 Use script may b much simple if U know how to. Read my post. https://www.neowin.net/forum/index.php?show...0entry2216041 Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2216637 Share on other sites More sharing options...
Ryan Hoffman Posted June 5, 2004 Share Posted June 5, 2004 This does not work for Server 2003. When you install those INF's, you get a lot of errors :-X. Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2221396 Share on other sites More sharing options...
Porthos SG1 Posted June 5, 2004 Share Posted June 5, 2004 Thanks gameguy! My jaw really dropped when I saw I had WMP8 again. Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2221512 Share on other sites More sharing options...
alphatesterusa Posted June 5, 2004 Share Posted June 5, 2004 Tekmaven said: This does not work for Server 2003. When you install those INF's, you get a lot of errors :-X. Watch carefully then. Hints - use script http://alphatesterusa.indiegroup.com/photo3.html Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2222040 Share on other sites More sharing options...
yesterday Posted June 6, 2004 Share Posted June 6, 2004 But i still meet the problem when i was installing inf. the error is : "the software you are installing has not passed windows logo testing to verify its compatibility with windows xp." every inf have the error. how to solve it? Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2226307 Share on other sites More sharing options...
alphatesterusa Posted June 6, 2004 Share Posted June 6, 2004 (edited) sorry Edited June 6, 2004 by alphatesterusa Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2229878 Share on other sites More sharing options...
alphatesterusa Posted June 6, 2004 Share Posted June 6, 2004 yesterday said: But i still meet the problem when i was installing inf.the error is : "the software you are installing has not passed windows logo testing to verify its compatibility with windows xp." every inf have the error. how to solve it? According to my understanding, use script is the best way. No crack/hack ; just teach that WMP 10 beta to work on 3790 or something other than XP. The main reason was that WMP 10 Beta was only written for XP only, they are not supposed to work other than xp. It's not only the inf files but also....... a long way to explain......... BTW I'll write a script within 24 hours and post it later. Hope it help. Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2229884 Share on other sites More sharing options...
alphatesterusa Posted June 6, 2004 Share Posted June 6, 2004 (edited) sorry. Edited June 6, 2004 by alphatesterusa Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2229887 Share on other sites More sharing options...
alphatesterusa Posted June 6, 2004 Share Posted June 6, 2004 (edited) sorry just got hackers locking my door. Edited June 6, 2004 by alphatesterusa Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2229888 Share on other sites More sharing options...
digistil Posted June 12, 2004 Share Posted June 12, 2004 Works for me (running v2142). Link to comment https://www.neowin.net/forum/topic/173586-wmp-10-and-sp2-conflict/#findComment-2268584 Share on other sites More sharing options...
Recommended Posts