Guest Posted June 1, 2011 Share Posted June 1, 2011 It seems to be more and more that movies require you to have your volume set extremely high if you want to hear voice, but when it comes to music and sound effects, the volume for these things are already two or three times louder than the dialogue! It's like they're preserving the cinema levels a little bit too much. This would be fine if we all lived in detached houses 10m from everyone else but obviously, I need to think about the neighbors. I'm playing my movies through Windows Media Center on my xbox 360 which doesn't really offer any software control over audio but I get some control through a stereo system which the audio is output. I've managed to get the voice levels a bit louder and the bass a little bit lower without sacrificing clarity too much but what else can be done? At the moment, it's this annoying game of getting up every time there is an action scene or dramatic music to turn the volume down, then back up again when the movie comes back to dialogue, it's a real pain! Do you have any suggestions about this? Thanks. Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/ Share on other sites More sharing options...
HawkMan Posted June 1, 2011 Share Posted June 1, 2011 You seem to be decoding movies with 5.1 sound but no 5.1 audio system. voices typically always come from the center speaker in surround. Make sure you xbox is set to Stereo output if you only have stereo. also if you're using a transcoder to stream to the xbox. make sure the splitter on the streamign system is set to decode into stereo as well or you might lose center channel sound. Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594030942 Share on other sites More sharing options...
Teebor Posted June 1, 2011 Share Posted June 1, 2011 You seem to be decoding movies with 5.1 sound but no 5.1 audio system. voices typically always come from the center speaker in surround. Make sure you xbox is set to Stereo output if you only have stereo. also if you're using a transcoder to stream to the xbox. make sure the splitter on the streamign system is set to decode into stereo as well or you might lose center channel sound. Nah, I agree with OP, my system is a 5.1 system and it has this problem as well with some newer movies :( Its been fine with older films, and if I go back and watch those older films they are still fine Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594030972 Share on other sites More sharing options...
HawkMan Posted June 1, 2011 Share Posted June 1, 2011 Well if you are using the computer for playback, make sure that the filter and splitter is set up to decode the audio correctly, the defaults settings for them tend to be pretty badly set up, especially if you have a 5.1 as it's usually set to just do stereo. As for newer movies, yes the voice do tend to be lower than the effects, but not dramatically so, though it can at times be annoying. but then again, what are you likely to hear loudest and explosion or someone talking. Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594030978 Share on other sites More sharing options...
Guest Posted June 1, 2011 Share Posted June 1, 2011 It's all set for stereo audio which is what makes me think it's the way which the audio has been mastered :/ Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594031066 Share on other sites More sharing options...
Salty Wagyu Posted June 1, 2011 Share Posted June 1, 2011 I have had this problem for almost 10 years, and still do. No matter what codecs/player packages I had or PC/TV used it would always have the problem of voice dialogue being too quiet on any 5.1 encoded content. I don't use an amp, just a simple video and audio connection directly to the TV, I used to connect audio by a 3.5mm audio jack, now its via HDMI. I set up everything in the software to be 2.0 Stereo, as my Samsung HDTV is stereo after all, no amp or separate 5 speakers setup. In the end, it just doesn't seem to downmix properly at all. The only way I've found to fix it is to enable Normalization in the audio codec settings to bring voice and loud explosions on the same level, but this has a side effect of annoyingly bringing up and fading out background sounds which I don't think is supposed to be like that. I'm still looking for a better solution than this though. Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594031128 Share on other sites More sharing options...
Guest Posted June 1, 2011 Share Posted June 1, 2011 There was a time when I had my PC attached to my TV, I used to spend hours tweaking ac3filter to get the sound just right but now my PC is in the home office and that's not an option. I just can't believe that they never added this option to the 360! Our TV is actually a computer monitor as well so I don't have the luxury of normalization or "night mode" with audio. The amp which the stereo is plugged into has an EQ but it's a bit weird, sort of like a spline curve with only 5 control points which doesn't offer enough control. Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594031172 Share on other sites More sharing options...
ArKeYa Posted June 1, 2011 Share Posted June 1, 2011 I'm annoyed as well. Aside from the non trivial task of mixing the sound properly, what's another method that's easy to do? Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594032316 Share on other sites More sharing options...
Nagisan Posted June 1, 2011 Share Posted June 1, 2011 Always had this problem, we do have a 5.1 surround sound system, but its so quiet in terms of voice that we have to turn it up pretty loud. As such you can hear the action scenes just about everywhere in the house, even outside the house. Its to the point it almost hurts your ears, yet voice is at about the perfect level where you can hear it clearly but its not loud at all. Movies need to stop turning the dial to 11 on the special effects and turn the audio up above 2. Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594032364 Share on other sites More sharing options...
Rigby Posted June 1, 2011 Share Posted June 1, 2011 This has been bugging me a lot lately, even with TV shows. Constantly having to turn the volume up and down because one scene it's all quiet and you can barely hear what they are saying and then BOOOM EXPLOSIONS OMG! and the roof is shaking. It was bad enough when it was only the commercials that did that. :laugh: Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594032384 Share on other sites More sharing options...
DirtyLarry Veteran Posted June 1, 2011 Veteran Share Posted June 1, 2011 I have to say I also experience this issue, and I have an Onkyo 7.1 system, and I know for certain it is set up properly. It is not so much the low voices in the center speaker, although that is occasionally an issue as well, as much as the sound effects are just way, way to loud. Even with gaming, explosions, etc., are just way to loud. It is definitely a problem, and almost just exclusively with modern movies. It does not bother me so much, but drives my wife crazy, and also scares the hell out of my cat. But I literally have to sit there with my universal remote in hand, and manually change the audio level depending on the scene. Pretty stupid. And I have tried so many different things. Lowering the herz on the bass, increasing the treble, going back to all default settings, recalibrating my system several times. It is always the damn effects are just way louder then everything else. Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594032500 Share on other sites More sharing options...
Salty Wagyu Posted June 1, 2011 Share Posted June 1, 2011 Did not realise it affected this many people, trying to look up similar posts on google is pretty scarce. I wonder how Sky do it though, the sound is just right on whatever they broadcast, even movies. Just unable to replicate this on a HTPC. Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594032906 Share on other sites More sharing options...
epk Posted June 1, 2011 Share Posted June 1, 2011 Oh, I'm glad I'm not alone. It's particularly bad on some newish bluray movies I've watched. Barely hear the dialogue but when SFX come in, watch out! DVDs weren't so bad, except for spanish ones. Once I had to turn on subtitles to understand anything and it's my native language -.- Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594032938 Share on other sites More sharing options...
Ambroos Posted June 1, 2011 Share Posted June 1, 2011 I noticed this a lot with Inception. A lot. Desk-tremor-like a lot. Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594032948 Share on other sites More sharing options...
shakey Posted June 1, 2011 Share Posted June 1, 2011 I had this with a copy of Aliens..... I had to turn up the volume almost max to hear what they were saying, but then any other sound, would almost blow me out of the windows due to how loud it was. I also use a 5.1 surround sound set up, and have run into this lately with just a few movies. Luckily, it isn't enough to make me irate, but it is enough when it happens, to ruin the experience. Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594032950 Share on other sites More sharing options...
Dashel Posted August 17, 2011 Share Posted August 17, 2011 Same deal, 5.1 setup where like Larry I have to babysit the remote during a movie and a few TV shows. Only general solution I have is using the Night mode on my Yamaha reciever with a light bias toward the center channel (Klipsch so they are pretty bright as is), but as noted it sometimes brings up background noises far too much (forget the movie but the cricket noises got ridiculous). The overly high dynamic range does seem to be the problem, too much cinema for the small screen. I haven't seen any reciever with a 'top' Db limit which would probably do the job. Which is funny cause the opposite is happening with music tracks in general which use more compression. I would say it seems better with BluRay actually compared to DVD, odd? Other oddity is that THX/Dolby trailers sound fine with the right balance. Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594242016 Share on other sites More sharing options...
stromo Posted October 7, 2011 Share Posted October 7, 2011 I also have noticed this, generally I just tweak the centre channel to output louder than the default setup, granted this doesn't help the op on stereo but in 5.1 it should be feasible on must receivers to change a specific speaker volume. Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594364891 Share on other sites More sharing options...
Judy958 Posted November 23, 2011 Share Posted November 23, 2011 I also had this problem for years. I just solved it with this link and am beyond thrilled. Not perfect but ninety percent improved. Enjoy! http://hometheater.about.com/od/hometheateraudiobasics/qt/centerchannelqt.htm Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594470739 Share on other sites More sharing options...
spUrr Posted January 13, 2012 Share Posted January 13, 2012 Dynamic Range adjustment/control is what I was going to mention - I just tick the box inside the AC-3 settings dialogue and all seems ok. Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594579925 Share on other sites More sharing options...
monkey13 Posted January 13, 2012 Share Posted January 13, 2012 I found turning down my sub woofer helped with the problem for me. Unless it is James Earl Jones then dialog won't really do much through the sub but all the crash bang wholop stuff will. Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594579935 Share on other sites More sharing options...
Sir Topham Hatt Posted January 18, 2012 Share Posted January 18, 2012 I get this with some movies, but I just take this as that is hwo they are and set the audio to a suitable level. The differences for me aren't HUGE, but enough to be annoying. Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594591929 Share on other sites More sharing options...
Wakers Posted January 18, 2012 Share Posted January 18, 2012 It's down to how the sound is mastered on DVDs and Blu Rays. Some films are worse than others but it is genuinely a problem on nearly every DVD I own. Unlike CDs, where all dynamics are removed these days, DVDs have far too large a range between quiet sounds and loud sounds. I'm not sure why they do this but no matter what sound system you have, there is usually no way to avoid the ridiculously loud jumps in volume. Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594591949 Share on other sites More sharing options...
loubanner Posted February 25, 2012 Share Posted February 25, 2012 I have an xbox 360 setup to a 26 inch Sony Bravia KDL-26M400 720p tv with no cable, just streaming netflix... nothing fancy. I have adjusted the sound every way possible, but to no avail. Can't hear a word of audio unless the volume is cranked, upon which something else occurs in the show/movie and the girlfriend is yelling at me and neighbors (it is a small apartment) are pounding on my door. If anyone can help prevent me from throwing the remote through the tv, I would appreciate it. Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594679730 Share on other sites More sharing options...
Salty Wagyu Posted February 28, 2012 Share Posted February 28, 2012 Have been watching AC3 audio encoded movies for the past week with DRC (Dynamic Range Compression) option enabled in FFDShow, but this hasn't solved the issue, music/sound effects are still too loud when set at a volume where dialogue is comfortable. Maybe FFDShow does a crap job at DRC? I may try AC3Filter in MPC-HC next, this page seems to know the problems with low dialogue and has shown a number of settings that can be tried: http://ac3filter.net...nge_compression At least that's better than a single checkbox in ffdshow. Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594685638 Share on other sites More sharing options...
Ntrstd Posted February 28, 2012 Share Posted February 28, 2012 What happens if you disconnect the subwoofer and one or more of the loudest speakers? Perhaps move the centre speaker up to the listeners? Have you tried using a different player? What about a portable DVD player? Link to comment https://www.neowin.net/forum/topic/1001602-quiet-voice-loud-everything-else/#findComment-594685682 Share on other sites More sharing options...
Recommended Posts