Post Your Case Mods


Recommended Posts

Here's some updated pics, mounted my watercooling system now, and changed the PSU (black sleeves now, instead of green).

Watercooling:

AC Aquastream (Eheim 1046) pump

MIST Mistress 2 water container

AC Airplex EVO 240 radiator

2x Papst 120mm fan 4412FGL @ 7v

Fanmate rheobus

MIST CPU waterblock, S754/S939/S940

AC Twinplex 6800 GPU block

Kuriyama hose 3/8"ID

CoolSleves

Destilled battery water

AC Anti-Corrosion Fluid

AC BlueMotion UV Fluid

PSU sucks fresh air in from the top, under a filtered cover. The fans that blows air on the 240mm radiator also sucks in air from the top, from under the filtered cover :)

Waterpump, HDD's, Radiator and all fans are mounted with vibration isolating rubber grommets :)

585605901[/snapback]

What are your Temps?

What are your Temps?

585605922[/snapback]

Currently my temps are:

Temp in my appartment : 25c

Case temp: 31c

CPU temp: 28c

GPU temp: 36c (i'm using ForceWare drivers with the temp-bug, so it should get lower by like 10c when the temp-bug is fixed)

HDD1 temp: 28c

HDD2 temp: 30c

I've used Arctic Silver 5 thermal compound, and it takes approx. 200hrs before it works at it's best. And my computer has been running at like 15hrs, so my temps should get a few celsius lower in a week or so :)

Full load temps are 3-4c higher for the cpu, 5-7c higher for the gpu and 2-3c higher for the case.

Atm i dont care about the cable management because i just got my DFI LanParty NF4 SLI-DR (Socket 939) PCI-Express Motherboard,

GX-023-XF XFX GeForce PCX6600 GT Extreme Gamers Edition 128MB DDR3 TV-Out/Dual DVI (PCI-Express), Neopower 480w and ill be ordering my Winchester 3500+ and 2X512mb ram next week and when i install thit all im going to make the cable management as unvisible as possible, so for now it doesnt matter.

-DannyGlass

Updated pics of my rig:

desktop3.jpg

desktop1.jpg

desktop2.jpg

Not done yet. Need to change the IDE cables for round one's. Sleeve a few cables. Change the faceplate of the Sunbeam Rheobus to Lian Li alu style one's (drill hole's in the one's that came with the case), and throw out the two Sunbeam UV lights i have in it (30cm's) and put some other colours in (any ideas on what would be suitable?), as i flushed out the UV reactive fluid i had in the watercooling cause it was crappy as hell.

I had my new rig for about 2 months now and loving it :D , specs are 2500xp, 512 mb ram, 120gig sata, 6600gt agp, 420W psu and antec 1000amg case. So far i have 1 blue led fan on side panel, 2 blue uv fans as exhaust, and a fan control panel on frot, pics:

post-87528-1111574113_thumb.jpg

That is one tall case youve got there M1h4iL which puts me off it.

-DannyGlass

585679796[/snapback]

I agree its a tall case, but its soo roomy, and it is afterall a server case. But its good quality, cheap and has plentry of room to move around in :D

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.