forster Posted March 11, 2020 Share Posted March 11, 2020 So I'm a networking scrub - I have my main PC and my Freenas server. I'm considering two of these to speed up transfer speeds. And some cable to link them together. However, do I need a 10gb switch inbetween, or can I connect these directly to each other and have 10gbe? Where's the DHCP coming from? I guess I might be missing something. I'm also drunk and cant focus correctly. Forgive me. Thanks Link to comment Share on other sites More sharing options...
neufuse Veteran Posted March 11, 2020 Veteran Share Posted March 11, 2020 (edited) https://www.amazon.com/MikroTik-CRS305-1G-4S-Gigabit-Ethernet-RouterOS/dp/B07LFKGP1L It's cheap, it has SFP+'s for Fiber or RJ45 10GbE and it supports multi-gig 2.5,6,10gbit SFP+'s you'd need though https://www.amazon.com/Mikrotik-S-RJ10-MikroTik/dp/B078SNK1MY forster 1 Share Link to comment Share on other sites More sharing options...
neufuse Veteran Posted March 11, 2020 Veteran Share Posted March 11, 2020 That should of been 10Mbit, 100Mbit, 1GbE, 2.5GbE, 5GbE ,10GbE supported, don't know where 6 came from Link to comment Share on other sites More sharing options...
forster Posted March 11, 2020 Author Share Posted March 11, 2020 UK based is this one, I really should probably watch some YT videos on the whole thing, I'm not going to pull the trigger while the room is spinning, but I am very grateful for your advice dude. Cheers xrobwx71 and Brandon H 1 1 Share Link to comment Share on other sites More sharing options...
Brandon H Supervisor Posted March 11, 2020 Supervisor Share Posted March 11, 2020 drunken research is sometimes the best research lol on topic though; technically you can use a cross-over cable to plug the 2 devices directly together and set a static IP to both but having a device in between to act as a gateway/DHCP makes things overall easier forster, xrobwx71 and fusi0n 3 Share Link to comment Share on other sites More sharing options...
forster Posted March 11, 2020 Author Share Posted March 11, 2020 So the barrier to entry, cost wise, in the UK anyway for two cables, two cards and a switch is £418 - as a thought experiment it's been worthwhile. Id do the crossover thing, but I think I'd rather buy something a bit more robust for future proofing, but this is way above budget and way above my needs for transferring porn files. Thanks for the input, 1gb is getting annoyingly slow, I think Ill just wait and see what happens technology wise. I could aggregate 1gb connections, but part of me feels that there's something more future-proof just around the corner! Cheers guys. Link to comment Share on other sites More sharing options...
+Fahim S. MVC Posted March 11, 2020 MVC Share Posted March 11, 2020 20 minutes ago, forster said: So I'm a networking scrub - I have my main PC and my Freenas server. I'm considering two of these to speed up transfer speeds. And some cable to link them together. However, do I need a 10gb switch inbetween, or can I connect these directly to each other and have 10gbe? Where's the DHCP coming from? I guess I might be missing something. I'm also drunk and cant focus correctly. Forgive me. Thanks The cable you've linked to won't work with the card you've linked to. The cable is has SFP+ termination whereas the card has RJ45. forster 1 Share Link to comment Share on other sites More sharing options...
forster Posted March 11, 2020 Author Share Posted March 11, 2020 1 minute ago, Fahim S. said: The cable you've linked to won't work with the card you've linked to. The cable is has SFP+ termination whereas the card has RJ45. Im a total noob, forgive me for probably asking something stupid - but Cat7 is 10gb compatible, would that work fine instead of the SFP+? Link to comment Share on other sites More sharing options...
Brandon H Supervisor Posted March 11, 2020 Supervisor Share Posted March 11, 2020 2 minutes ago, Fahim S. said: The cable you've linked to won't work with the card you've linked to. The cable is has SFP+ termination whereas the card has RJ45. ah good catch. yeah it would be a Cat7 ethernet cable OP would want for 10gb support https://www.amazon.co.uk/Veetop-Ethernet-Network-Shielded-Connector/dp/B00XU1MXH4/ Just now, forster said: Im a total noob, forgive me for probably asking something stupid - but Cat7 is 10gb compatible, would that work fine instead of the SFP+? jynx forster 1 Share Link to comment Share on other sites More sharing options...
forster Posted March 11, 2020 Author Share Posted March 11, 2020 Just now, Brandon H said: ah good catch. yeah it would be a Cat7 ethernet cable OP would want for 10gb support https://www.amazon.co.uk/Veetop-Ethernet-Network-Shielded-Connector/dp/B00XU1MXH4/ jynx Hurray, Im not a total moron afterall!! Haha Link to comment Share on other sites More sharing options...
+Fahim S. MVC Posted March 11, 2020 MVC Share Posted March 11, 2020 1 minute ago, Brandon H said: ah good catch. yeah it would be a Cat7 ethernet cable OP would want for 10gb support https://www.amazon.co.uk/Veetop-Ethernet-Network-Shielded-Connector/dp/B00XU1MXH4/ jynx Cat5e can handle 10GbE at a short enough distance. Certainly good enough for most (UK) houses forster and goretsky 2 Share Link to comment Share on other sites More sharing options...
forster Posted March 11, 2020 Author Share Posted March 11, 2020 Just now, Fahim S. said: Cat5e can handle 10GbE at a short enough distance. Certainly good enough for most (UK) houses Hmm, I have Cat6 on my local connections, I just dont want to have that 'oh crap' moment if I picked up all the expensive bits then forgot about the ties that bind them together! Link to comment Share on other sites More sharing options...
Brandon H Supervisor Posted March 11, 2020 Supervisor Share Posted March 11, 2020 Just now, Fahim S. said: Cat5e can handle 10GbE at a short enough distance. Certainly good enough for most (UK) houses yeah but ethernet cables are cheap (especially if you just buy the cable and do the ends yourself) so may as well go for the full guaranteed support IMO forster 1 Share Link to comment Share on other sites More sharing options...
forster Posted March 11, 2020 Author Share Posted March 11, 2020 Also, PC on the left, server on the right distance is not an issue tbh goretsky and Brandon H 2 Share Link to comment Share on other sites More sharing options...
neufuse Veteran Posted March 11, 2020 Veteran Share Posted March 11, 2020 if you got systems that close together I'd go with the 10GbE cross over and static them together... that or get two SFP+ 10GbE cards and do a DAC connection Brandon H and goretsky 2 Share Link to comment Share on other sites More sharing options...
forster Posted March 11, 2020 Author Share Posted March 11, 2020 2 minutes ago, neufuse said: if you got systems that close together I'd go with the 10GbE cross over and static them together... that or get two SFP+ 10GbE cards and do a DAC connection Yeah Im looking at the crossover solution right now, so we have two of these cards, and one of these cables - its not a crossover, but this is a crossover and its listed as 1gb, not 10gb so Im kind of confused. On the flipside, we have this SFP+ card, and an SFP+ cable - is there such thing as an SFP+ crossover, for no middle-man switch (manually assigning IPs) or would the listed cable here work fine? Thanks for continued support, its very much appreciated. Link to comment Share on other sites More sharing options...
DaveLegg Developer Posted March 12, 2020 Developer Share Posted March 12, 2020 You don't need a crossover cable - anything that's 1gig or more will support auto-crossover (it's part of the spec). If you're getting an SFP DAC cable, there's no such thing as a crossover. So yes, you should be fine with either the SFP or ethernet options you've listed forster and Brandon H 2 Share Link to comment Share on other sites More sharing options...
forster Posted March 12, 2020 Author Share Posted March 12, 2020 4 hours ago, DaveLegg said: You don't need a crossover cable - anything that's 1gig or more will support auto-crossover (it's part of the spec). If you're getting an SFP DAC cable, there's no such thing as a crossover. So yes, you should be fine with either the SFP or ethernet options you've listed You're my hero, thank you I resisted the urge to pull the trigger last night, will see how things go over the next few weeks and see how much I need to invest in face masks, toilet rolls and hand sanitizer and go from there! Link to comment Share on other sites More sharing options...
Brandon H Supervisor Posted March 12, 2020 Supervisor Share Posted March 12, 2020 6 hours ago, DaveLegg said: You don't need a crossover cable - anything that's 1gig or more will support auto-crossover (it's part of the spec). If you're getting an SFP DAC cable, there's no such thing as a crossover. So yes, you should be fine with either the SFP or ethernet options you've listed good point; I keep forgetting auto-crossover is a thing with gig+ as I haven't worked with gig setups much personally Link to comment Share on other sites More sharing options...
neufuse Veteran Posted March 12, 2020 Veteran Share Posted March 12, 2020 (edited) 15 minutes ago, Brandon H said: good point; I keep forgetting auto-crossover is a thing with gig+ as I haven't worked with gig setups much personally I still call them a cross over cable because that is technically what they are doing still just not at the physical cable level😆 Link to comment Share on other sites More sharing options...
forster Posted March 12, 2020 Author Share Posted March 12, 2020 Sata 3 4tb drives aren’t really going to fly I’d guess, even if raided. And I don’t have bulk pcie storage? It’s going to bottle neck pretty hard right? Again, super noob so bear with me Link to comment Share on other sites More sharing options...
Brandon H Supervisor Posted March 12, 2020 Supervisor Share Posted March 12, 2020 5 minutes ago, forster said: Sata 3 4tb drives aren’t really going to fly I’d guess, even if raided. And I don’t have bulk pcie storage? It’s going to bottle neck pretty hard right? Again, super noob so bear with me SATA3 I think would be fine; the bigger bottle neck I think would be depending on if they're HDDs or SSDs Link to comment Share on other sites More sharing options...
adrynalyne Posted March 12, 2020 Share Posted March 12, 2020 (edited) 2 minutes ago, Brandon H said: SATA3 I think would be fine; the bigger bottle neck I think would be depending on if they're HDDs or SSDs For 10Gb, I would want pcie/nvme drives. 1Gb can top out at 123MB/s. Sata3 SSDs usually peak at what, 540MB/s? Brandon H 1 Share Link to comment Share on other sites More sharing options...
forster Posted March 12, 2020 Author Share Posted March 12, 2020 4 minutes ago, adrynalyne said: For 10Gb, I would want pcie/nvme drives. 1Gb can top out at 123MB/s. Sata3 SSDs usually peak at what, 540MB/s? Yeah its a 6g/sec connection at SATA3 - hmmm.... the plot thickens, thank you both for verifying Link to comment Share on other sites More sharing options...
Brandon H Supervisor Posted March 12, 2020 Supervisor Share Posted March 12, 2020 5 minutes ago, adrynalyne said: For 10Gb, I would want pcie/nvme drives. 1Gb can top out at 123MB/s. Sata3 SSDs usually peak at what, 540MB/s? good to know how much difference is there in potential speeds between SATA3 and PCIE? I've heard PCIE drives can be a bit faster but I've never looked into how much. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now