FujiKeno Posted April 13, 2023 Share Posted April 13, 2023 Hello everyone, I have had some problems with my PC recently... It's a PC that was built by the staff of a website called CSL-Computer which is like a PC Configuration site. I used this PC for about 2 Years and after a crash while playing GTA it wouldn't turn on properly anymore. Here's exactly what happened: 1: Computer Bluescreens and I let it work for nearly 30 mins 2: I then decide to press the power button once, wait 2-3 Mins and nothing happens 3: then I flip the power switch on my PSU to turn it off entirely 4: I boot the PC again, fails to boot into windows and instead boots into bios 5: I try to make windows boot but bios tells me it can't detect a harddrive/SSD 6: I use the internet to figure out how to fix it but after rebooting into the bios multiple times I turn it off for some time then attempt it again 7: Suddenly my Monitor doesn't receive a Signal and the light on my RTX keeps switching on and off as if it was trying to start I started troubleshooting and tested the cables by swapping and checking if they were seated properly but nothing happens, heck I even got another case(unrelated purchase) and put the components in but it still wont turn on. HDMI-Cable works properly, Monitor does, all Parts also seem to work since they light up, fans are spinning but I am not getting any Monitor-Signals even though the Monitor briefly leaves Power saving mode when starting the PC but then says "no signal found" I had a similar Problem before where the PC suddenly wouldn't boot into anything but then I still got beep-signals so I was able to figure out that the ram was faulty. This time around I have no Idea to fix it and I figured asking the experts of neowin for advice before bringing it to a expensive PC-Repair shop I hope somebody is able to give me solutions or at least suspect what component might be faulty Link to comment https://www.neowin.net/forum/topic/1427968-pc-boots-but-monitor-gets-no-signal/ Share on other sites More sharing options...
Mindovermaster Global Moderator Posted April 13, 2023 Global Moderator Share Posted April 13, 2023 Try reseating EVERYTHING. 24-pin, 8-pin, SSD connection, GFX card. RAM, etc. It might be your SSD is kicking the bucket.. goretsky and FujiKeno 1 1 Share Link to comment https://www.neowin.net/forum/topic/1427968-pc-boots-but-monitor-gets-no-signal/#findComment-598812594 Share on other sites More sharing options...
FujiKeno Posted April 13, 2023 Author Share Posted April 13, 2023 (edited) On 13/04/2023 at 21:31, Mindovermaster said: Try reseating EVERYTHING. 24-pin, 8-pin, SSD connection, GFX card. RAM, etc. It might be your SSD is kicking the bucket. Thanks so much, my PC boots again, I had to reseat the ram for some reason, now it works fine tysm! It didn't even boot into the bios anymore, went straight to windows I don't know why reseating the ram solved everything at once hellowalkman 1 Share Link to comment https://www.neowin.net/forum/topic/1427968-pc-boots-but-monitor-gets-no-signal/#findComment-598812603 Share on other sites More sharing options...
Mindovermaster Global Moderator Posted April 13, 2023 Global Moderator Share Posted April 13, 2023 On 13/04/2023 at 14:45, FujiKeno said: Thanks so much, my PC boots again, I had to reseat the ram for some reason, now it works fine tysm! It didn't even boot into the bios anymore, went straight to windows I don't know why reseating the ram solved everything at once Sometimes it's as easy as that.. FujiKeno, hellowalkman and +jamwheat 3 Share Link to comment https://www.neowin.net/forum/topic/1427968-pc-boots-but-monitor-gets-no-signal/#findComment-598812621 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now