S.MULLA Posted May 10, 2004 Share Posted May 10, 2004 a new emulator called PearPC seems to be able to run OS X on x86 machines: http://pearpc.sourceforge.net/index.html Check out the screenshots: http://pearpc.sourceforge.net/screenshots.html source:aqua-soft.org [forum] Link to comment Share on other sites More sharing options...
0 microsoft32 Posted May 12, 2004 Share Posted May 12, 2004 What setting do you use with disk ulity to set up the HD? Link to comment Share on other sites More sharing options...
0 KlyX Posted May 12, 2004 Share Posted May 12, 2004 I think, this is what you need: http://pearpc.sourceforge.net/installdarwin.html Link to comment Share on other sites More sharing options...
0 Starman Posted May 12, 2004 Share Posted May 12, 2004 <slightlyofftopic> I'm against pirating, but this is just for experimenting. Brush it off. </slightlyofftopic> Anyway, the instructions on the main PearPC site are very, VERY vague. When I first read it, I thought you NEEDED Mandrake to run this thing. I don't know if it's the poor English, or a poor translation, but I was thinking about just writing a real down-to-earth page for this project and giving it to them. Mike Link to comment Share on other sites More sharing options...
0 microsoft32 Posted May 12, 2004 Share Posted May 12, 2004 Is that the only way to do it? you cannot set up the disk via disk utility? Link to comment Share on other sites More sharing options...
0 CyBeRiA Posted May 12, 2004 Share Posted May 12, 2004 ok, I have Darwin installed (which I just realized wasn't necessary)... My OSX cd image is a .toast file... but ppc doesn't seem to be able to boot it. it doesn't give correct partitions (ie, it only shows 3 partitions on the disk). Do I need to convert it to a regular iso or something? How would I do that on my PC (I'm at work so I don't have my Mac with me)? Link to comment Share on other sites More sharing options...
0 Starman Posted May 12, 2004 Share Posted May 12, 2004 Is that the only way to do it?you cannot set up the disk via disk utility? Yes you can. That's what I did. Mike Link to comment Share on other sites More sharing options...
0 Pixelwix Posted May 12, 2004 Share Posted May 12, 2004 is there anyway to speed up the ram and i give it some more ram? Link to comment Share on other sites More sharing options...
0 kwyjibo Posted May 12, 2004 Share Posted May 12, 2004 is there anyway to speed up the ram and i give it some more ram? 0 Mhz. Hehehe. Link to comment Share on other sites More sharing options...
0 ataxy Posted May 12, 2004 Share Posted May 12, 2004 Dude... Why do you feel you have to be such a busy-body, and care about everyone who dosnt have a legal copy of osx... look come on leave him alone he said he took is chill pill so no point of going on the subject again if you want to have an offf topic chat with him leave him a pm Link to comment Share on other sites More sharing options...
0 AsiQ Posted May 12, 2004 Share Posted May 12, 2004 Hey guys im just instaling mandrake 9.1 ppc edition... going well for now.... but when i've tried booting darwin ive got this line "Waiting for root device" it was stuck on this line... like this "Waiting for root device" "Waiting for root device" "Waiting for root device" "Waiting for root device" for the all night... any1 have a solution? Link to comment Share on other sites More sharing options...
0 Circaflex Posted May 12, 2004 Share Posted May 12, 2004 Don't you mean CD's? There are three, pirateboy. STFU already kwyjibo, we see you dont like piracy, it happens on this board heck some mods are involved in piracy get over yourself and just leave this thread if your so uptight about piracy Link to comment Share on other sites More sharing options...
0 jedavis1 Posted May 12, 2004 Share Posted May 12, 2004 is there anyway to speed up the ram and i give it some more ram? You actually got it to run something at the desktop? I hadn't heard a report of the desktop being "functional". Cool! As far as RAM: I had already posted this: # # Main memory (default 128 MiB) # must be >= 64 MiB # memory_size=0x08000000 If you use the calculator that is in XP set it for the Scientific view... Take the amount of RAM that you want to emulate and multiply it by 1048576 (1024x1024) and then hit the "Hex" radio button, it will give you a hexidecimal equivelant for the ammount of RAM (in bytes) eg: 256x1048576=268435456 (hex=10000000 or 0x10000000) Link to comment Share on other sites More sharing options...
0 KlyX Posted May 12, 2004 Share Posted May 12, 2004 Hmm, somehow, this does not work here I entered 0x15E00000 (350 MB RAM) and get the message after a minute: Cannot read page table. Is there a configuration, which will work good? Link to comment Share on other sites More sharing options...
0 KlyX Posted May 12, 2004 Share Posted May 12, 2004 There is another problem: Adter booting, this thing here appears: . So far so good... But now, If I work with the mouse the following actions werde done: - Closes the window - Bar on the top goes away - Bar reappears - Window reappears - Da Capo (another round... and anothher). Where is the problem?? Link to comment Share on other sites More sharing options...
0 stefanka Posted May 12, 2004 Share Posted May 12, 2004 Here is an Installations Doku for Germans. It Works! ;) http://www.abacado.com/index.php?option=co...id=11&Itemid=25 Link to comment Share on other sites More sharing options...
0 KlyX Posted May 12, 2004 Share Posted May 12, 2004 Hi Stefan... Thanks for the link... You just have to know... KlyX = Geiser (Chip.de) ;) so, my Problems are my Problems... hope there are some solutions somewhere. KlyX Link to comment Share on other sites More sharing options...
0 sanderg14 Posted May 12, 2004 Share Posted May 12, 2004 could you run MorphOS with Pearpc ? Morphos.net for further information Link to comment Share on other sites More sharing options...
0 AquaFX Posted May 12, 2004 Share Posted May 12, 2004 How fast is Pear running OSX? is it fast enough to use applications...? or install apps? Link to comment Share on other sites More sharing options...
0 Redestium Posted May 12, 2004 Share Posted May 12, 2004 How fast is Pear running OSX? is it fast enough to use applications...? or install apps? Not right now. Link to comment Share on other sites More sharing options...
0 stefanka Posted May 12, 2004 Share Posted May 12, 2004 Hi Stefan...Thanks for the link... You just have to know... KlyX = Geiser (Chip.de) ;) so, my Problems are my Problems... hope there are some solutions somewhere. KlyX good work ;) Link to comment Share on other sites More sharing options...
0 KlyX Posted May 12, 2004 Share Posted May 12, 2004 So I have no chance to do something with OS X... (see post below). And I don't know, how to get it work... So the RAM Config doesn't work... Link to comment Share on other sites More sharing options...
0 SoapyHamHocks Member Posted May 12, 2004 Member Share Posted May 12, 2004 sanderg14 give me a link somewhere to get morphos and ill try it out. Link to comment Share on other sites More sharing options...
0 pimpshiznid Posted May 12, 2004 Share Posted May 12, 2004 Hey, I dunno if this has been posted, but Kevin Rose (from the Screensavers) got it running. He posted all his files and everything in his blog here. Including mentioning Neowin, so maybe he is a lurker around here after all... Link to comment Share on other sites More sharing options...
0 sanderg14 Posted May 12, 2004 Share Posted May 12, 2004 www.morphOs.net but where you can download , i don't know , look by google Link to comment Share on other sites More sharing options...
0 CyBeRiA Posted May 12, 2004 Share Posted May 12, 2004 well, here's where i am right now... it's running surprisingly fast. thank god for dual cpus (even though they're only 1.4GHz) I set the processor affinity for ppc.exe to only use cpu1...leaving my other processor (cpu0) free to handle everything else, and have cpu1 focus on ppc Link to comment Share on other sites More sharing options...
Question
S.MULLA
a new emulator called PearPC seems to be able to run OS X on x86 machines:
http://pearpc.sourceforge.net/index.html
Check out the screenshots:
http://pearpc.sourceforge.net/screenshots.html
source:aqua-soft.org [forum]
Link to comment
Share on other sites
3,213 answers to this question
Recommended Posts