• 0

Running Mac OS X on x86 PC!


Question

Recommended Posts

  • 0

Hi, This is my first post but MacOS might work a little faster if it is set as the default shell instead of explorer.exe. It would run a little faster because instead of there be a shell running on a shell(MacOS's shell running on top of explorer). I am not sure if this will work but can someone try it and find out hte difference. To change the shell:

1. goto start>run and type 'gpedit.msc' without the ' '

2.under user configuration goto Administrative Templates

3.click on system not the + sign.

4.double click on coustom user and change it

Link to comment
Share on other sites

  • 0
if all you going to go is be an ass about warez, then stop downloading warez yourself. its called being a hypocrite

where the **** do you see me saying that i download warez? :crazy:

show me a single post of mine that would make me a hypocrite! :crazy:

neowin has a rule about warez, obey the rules and stfu, otherwise get the **** out of neowin

Link to comment
Share on other sites

  • 0
Hi, This is my first post but MacOS might work a little faster if it is set as the default shell instead of explorer.exe. It would run a little faster because instead of there be a shell running on a shell(MacOS's shell running on top of explorer). I am not sure if this will work but can someone try it and find out hte difference. To change the shell:

1. goto start>run and type 'gpedit.msc' without the ' '

2.under user configuration goto Administrative Templates

3.click on system not the + sign.

4.double click on coustom user and change it

what are you talking about ?? :blink:

Link to comment
Share on other sites

  • 0

"Anyone know why I am showing 128mb Ram in the OSX 10.2 System Info?? I am running 512Mb. Anyway to change this to boost performance perhaps??"

Unrealism:

It's a setting in the configuration file.

#

# Main memory (default 128 MiB)

# must be >= 64 MiB

#

#memory_size=0x8000000

it's a hex value. Naturally, 128 written in hex is 0x80. 256 has a value of 0x100, and 512 has the hex value of 0x200. I don't think you'd want to set it to a full 512. But you could gradually increment it (if you have like a million hours) to see how it effects your overall system performance.

I've been unable to get OS X to work at all *sigh*. The Darwin iso image won't unzip (anyone else have this problem?) so I renamed it to darwin-701.iso then fired 'er up :huh: . It writes all the IO stuff then:

[iO/MACIO] dbdma: read(4) @00000004

[iO/CUDA] <WARNING> keyb reg1

It stops there. Anyone know what that means or how to fix this problem if it is indeed one? Am I just not being patient enough?

Happy Emulating

John

Link to comment
Share on other sites

  • 0
"Anyone know why I am showing 128mb Ram in the OSX 10.2 System Info?? I am running 512Mb. Anyway to change this to boost performance perhaps??"

Unrealism:

  It's a setting in the configuration file.

#

# Main memory (default 128 MiB)

# must be >= 64 MiB

#

#memory_size=0x8000000

it's a hex value.  Naturally, 128 written in hex is 0x80.  256 has a value of 0x100, and 512 has the hex value of 0x200.  I don't think you'd want to set it to a full 512.  But you could gradually increment it (if you have like a million hours) to see how it effects your overall system performance.

I've been unable to get OS X to work at all *sigh*.  The Darwin iso image won't unzip (anyone else have this problem?) so I renamed it to darwin-701.iso then fired 'er up :huh: .  It writes all the IO stuff then:

[iO/MACIO] dbdma: read(4) @00000004

[iO/CUDA] <WARNING> keyb reg1

It stops there.  Anyone know what that means or how to fix this problem if it is indeed one?  Am I just not being patient enough?

Happy Emulating

John

The darwin image only opened in my Mac after I removed the .gz extention from it. Looks like its not a valid .gz format or something.

And you dont need Darwin to partion the HD image. Follow my guide instead.

Link to comment
Share on other sites

  • 0

hey guys, sorry it took me so long to reply, went to the zoo today! Yippy!! :o

Anyway here is my current config file for my Mac OSX v10.2 to work.

Some notes I found having trouble with my install was...

1. Installing Darwin and making my partitions with it. (Use Mac OSX and setup your partitions through that)

2. The Change CD button would not work after the first image install. :s (in your ppccfg.osx config file, change your image that way.)

3. Using the "Select" option in prom_bootmethod (instead of auto, keeps booting the silly osx image)

4. Taking out the "-v" from prom_env_machargs

5. Being very, and I mean very fricken patient!!! LOL :D

Ps. I am going to try that Ram setting in hex by the way! Thanks for the tip Josta2317!! :D :D

-----------------------------------

# PearPC Configuration File

#

# Resolution

#

# 0: 640x480x8 (indexed)

# 1: 640x480x15

# 2: 640x480x32

# 3: 800x600x8 (indexed)

# 4: 800x600x15

# 5: 800x600x32

# 6: 1024x768x8 (indexed)

# 7: 1024x768x15

# 8: 1024x768x32

#

# The indexed modes are unsupported.

#

# default: 4

ppc_start_resolution = 8

#

# Redraw interval (in ms)

# must be between 1 and 999

#

# If you set this higher, PearPC will spend less time doing redraws (and so run faster)

# but feel less responsive. You should adjust this to your computer speed and personal

# preference.

#

redraw_interval_msec = 60

#

# Loader

#

#

# Boot method

# this can be

# 1. "auto", prom will boot the first bootable partition found (default)

# 2. "select", prom will show you a list of bootable partitions

# 3. "force", prom will load and boot the local file prom_loadfile

#

prom_bootmethod = "select"

# Example of how to use "force":

#prom_bootmethod = "force"

#prom_loadfile = "test/yaboot"

#prom_env_bootpath = "disk"

#

# bootargs: don't change unless you know what you are doing

# machargs: set to "-v" to get a verbose startup

#

#prom_env_bootargs = ""

prom_env_machargs = ""

#

# This is needed if you want to boot Mac OS X

#

prom_driver_graphic = "video.x"

# This will adjust the position of the initial page table (don't change)

#page_table_pa = 104857600

#

# CPU Config

#

# Processor Version Register

# Defaults to 0x00088302

# Only change if you know want you are doing

#

#cpu_pvr = 0x00088302

#

# Main memory (default 128 MiB)

# must be >= 64 MiB

#

#memory_size=0x8000000

#

# IO Devices

#

#

# PCI IDE Config

#

# Drive type will be set according to file extension:

# .img: Harddisk (filesize must be multiple of 516096)

# .iso: CD-Rom

# Or you can override this by specifying the type via

# pci_ide0_master_type / pci_ide0_slave_type

pci_ide0_master_installed = 1

pci_ide0_master_image = "osx.img"

#pci_ide0_master_type = "hd"

pci_ide0_slave_installed = 1

#pci_ide0_slave_image = "darwin-701.iso"

pci_ide0_slave_image = "osx.iso"

#pci_ide0_slave_image = "/dev/cdrom"

pci_ide0_slave_type = "cdrom"

#

# Network (unavailable on windows)

#

pci_3c90x_installed = 0

pci_3c90x_mac = "de:ad:ca:fe:12:34"

#

# USB

#

pci_usb_installed = 1

#

# NVRAM

#

nvram_file = "nvram"

---------------------------

Link to comment
Share on other sites

  • 0

I just tried the Ram setting and although it shows different ram now, it does not really seem to do any performance to the emulation. :(

I did try something out of cursoity though that someone might check out and confirm... Open up "Task Manager" in windows and tell ppc.exe to run at realtime by rightclicking. It did not seem to speed the boot process, however... I could be nuts but it seemed to improve how the enviroment overall ran once OSX was running. It is not much but hey... its a gain I think! :D

Cheers,

Unrealism

Link to comment
Share on other sites

  • 0

just started, after being stuck on it for an hour, I aborted and found a 10.3 Harddrive file at emaculation, but it is still loading the grey screen. Not sure what the problem is, I am assuming its something to do with the premade config file I got, but all files are correctly pointed to, and I get no errors...

Thanks,

Drew

Link to comment
Share on other sites

  • 0

But this is even before the install loads up so to speak. I doubt the gray screen is supposed to take over an hour. I have a 1700+ A-XP with 765 mb RAM. Can't see it being my computer.

Link to comment
Share on other sites

  • 0

lol Ok. Call me an idiot if you want, that's exactly what I am when it comes to this :p

Anyways. I was wondering, is there a way to install some version of Linux (That will already run on x86) within Windows like PearPC, or do I absolutely have to dual-boot with my current OS? I've been wondering because I really don't want to format or partition anything right now, and I'd like to be able to just tinker with Linux while still using Windows. Is this possible at all or is it just wishful thinking? lol.

Link to comment
Share on other sites

  • 0
lol Ok. Call me an idiot if you want, that's exactly what I am when it comes to this :p

Anyways. I was wondering, is there a way to install some version of Linux (That will already run on x86) within Windows like PearPC, or do I absolutely have to dual-boot with my current OS? I've been wondering because I really don't want to format or partition anything right now, and I'd like to be able to just tinker with Linux while still using Windows. Is this possible at all or is it just wishful thinking? lol.

Yep... use VirtualPC or VMWare. :)

Link to comment
Share on other sites

  • 0
Installing Mac OS X 10.3 now on PIII Tualatin 1.27Ghz 512MB SDRAM. Looks like it will take littlebit more then forever.

Btw, anyone tried to install OfficeX, Photoshop, etc? :)

I have:

www.davis-family.org/images/image003.png

Link to comment
Share on other sites

  • 0
Hmm... ok here is what I did.

1. installed Darwin.

2. booted the MacOS off the cd (iso image1)

3. after the install completes it reboots pearpc automatically.

4. start pearpc again with this command line ppc ppccfg.osx

5. tell it to boot off of number 2. (hd)

6. osx appears to boot but does nothing with a grey pinwheel and a big crossed out circle.

7. tried to boot back to cd, but all it wants to do is install all over again if I do so.

any ideas what I might be doing wrong??

PearPC v0.1.1

MacOSX 10.2 Images

Have you tried deleting you NVRAM file? Alot of times on a regular mac (especially OS X) you need to reset the nvram (or delete it) I have done this almost every time I have trouble... Just a thought.

Link to comment
Share on other sites

  • 0

Its cool jedavis1, I finally got the silly thing working the other night. :D

Now if it would only get faster! lol

By the way, can you peeps test my theory in the earlier thread... I opened task manager in windows and told ppc.exe to run in realtime, and it seemed to run a little better on the mac osx desktop!! Not much of a boost but seemed to be a little I think. Did not help with the boot process any though. :(

Link to comment
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.