KeR Posted May 20, 2004 Share Posted May 20, 2004 you have to edit the config file so it points to the right directory and files. Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2136526 Share on other sites More sharing options...
Jimmerz28 Posted May 20, 2004 Share Posted May 20, 2004 you have to edit the config file so it points to the right directory and files. Yea you have to make a copy of ppccfg.example in the directory, then open up your copy in notepad and make the correct changes to point it to you[r] fake harddrive (the .b2z or whatever you dl) and CDROM (.iso of Mac CD). Such as here. Is there a way to change a .dmg to .iso on PC? I looked on Google but everyone was how to change it on a Mac. Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2136596 Share on other sites More sharing options...
plainold Posted May 20, 2004 Share Posted May 20, 2004 :) Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2136662 Share on other sites More sharing options...
fahad Posted May 20, 2004 Share Posted May 20, 2004 # # bootargs: don't change unless you know what you are doing # machargs: set to "-v" to get a verbose startup # #prom_env_bootargs = "" #prom_env_machargs = "-s" prom_env_machargs = "" is that what you did ? I did this and it just booted the cd (this is all before step 13) i also tried # # bootargs: don't change unless you know what you are doing # machargs: set to "-v" to get a verbose startup # #prom_env_bootargs = "" #prom_env_machargs = "-v" prom_env_machargs = "-s" and it just booted the cd Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2136734 Share on other sites More sharing options...
Jimmerz28 Posted May 20, 2004 Share Posted May 20, 2004 Nope I changed the "" you have to the path of the file. I got this far...but then it hangs and I get this... Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2136806 Share on other sites More sharing options...
plainold Posted May 20, 2004 Share Posted May 20, 2004 (edited) @fahad: hmmm, my mistake; you have to do step 13 THEN do this, try that. Edited May 20, 2004 by pojo Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2136812 Share on other sites More sharing options...
Impulfusion Posted May 20, 2004 Share Posted May 20, 2004 I get stuck at the "Select a destination" screen... Theres no destination appearing... I waited 10 minutes and nothing appeared... Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2137106 Share on other sites More sharing options...
Jimmerz28 Posted May 20, 2004 Share Posted May 20, 2004 I get stuck at the "Select a destination" screen... Theres no destination appearing... I waited 10 minutes and nothing appeared... Did you configure your config file to point to your .img & .iso files? Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2137133 Share on other sites More sharing options...
Impulfusion Posted May 20, 2004 Share Posted May 20, 2004 Did you configure your config file to point to your .img & .iso files? Yes... Here it is: # PearPC Configuration File # # Resolution # # 0: 640x480x8 (indexed) # 1: 640x480x15 # 2: 640x480x32 # 3: 800x600x8 (indexed) # 4: 800x600x15 # 5: 800x600x32 # 6: 1024x768x8 (indexed) # 7: 1024x768x15 # 8: 1024x768x32 # # The indexed modes are unsupported. # # default: 4 ppc_start_resolution = 4 # # Redraw interval (in ms) # must be between 1 and 999 # # If you set this higher, PearPC will spend less time doing redraws (and so run faster) # but feel less responsive. You should adjust this to your computer speed and personal # preference. # redraw_interval_msec = 200 # # Loader # # # Boot method # this can be # 1. "auto", prom will boot the first bootable partition found (default) # 2. "select", prom will show you a list of bootable partitions # 3. "force", prom will load and boot the local file prom_loadfile # prom_bootmethod = "auto" # Example of how to use "force": #prom_bootmethod = "force" #prom_loadfile = "test/yaboot" #prom_env_bootpath = "disk" # # bootargs: don't change unless you know what you are doing # machargs: set to "-v" to get a verbose startup # #prom_env_bootargs = "" prom_env_machargs = "-v" # # This is needed if you want to boot Mac OS X # prom_driver_graphic = "C:\Documents and Settings\Impulfusion\Desktop\pearpc\video.x" # This will adjust the position of the initial page table (don't change) #page_table_pa = 104857600 # # CPU Config # # Processor Version Register # Defaults to 0x00088302 # Only change if you know want you are doing # #cpu_pvr = 0x00088302 # # Main memory (default 128 MiB) # must be >= 128 MiB # #memory_size=0x8000000 # # IO Devices # # # PCI IDE Config # # Drive type will be set according to file extension: # .img: Harddisk (filesize must be multiple of 516096) # .iso: CD-Rom # Or you can override this by specifying the type via # pci_ide0_master_type / pci_ide0_slave_type pci_ide0_master_installed = 1 pci_ide0_master_image = "C:\Documents and Settings\Impulfusion\Desktop\pearpc\pearpc-6gib.img" #pci_ide0_master_type = "hd" pci_ide0_slave_installed = 1 pci_ide0_slave_image = "c:\macosx.iso" #pci_ide0_slave_image = "/dev/cdrom" pci_ide0_slave_type = "cdrom" # # Network (unavailable on windows) # pci_3c90x_installed = 0 pci_3c90x_mac = "de:ad:ca:fe:12:34" # # USB # pci_usb_installed = 1 # # NVRAM # nvram_file = "nvram" Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2137157 Share on other sites More sharing options...
Jimmerz28 Posted May 20, 2004 Share Posted May 20, 2004 Try renaming the .img file. I did just to make things simpler...I dunno if it will work :pinch: # PearPC Configuration File # # Resolution # # 0: 640x480x8 (indexed) # 1: 640x480x15 # 2: 640x480x32 # 3: 800x600x8 (indexed) # 4: 800x600x15 # 5: 800x600x32 # 6: 1024x768x8 (indexed) # 7: 1024x768x15 # 8: 1024x768x32 # # The indexed modes are unsupported. # # default: 4 ppc_start_resolution = 4 # # Redraw interval (in ms) # must be between 1 and 999 # # If you set this higher, PearPC will spend less time doing redraws (and so run faster) # but feel less responsive. You should adjust this to your computer speed and personal # preference. # redraw_interval_msec = 200 # # Loader # # # Boot method # this can be # 1. "auto", prom will boot the first bootable partition found (default) # 2. "select", prom will show you a list of bootable partitions # 3. "force", prom will load and boot the local file prom_loadfile # prom_bootmethod = "auto" # Example of how to use "force": #prom_bootmethod = "force" #prom_loadfile = "test/yaboot" #prom_env_bootpath = "disk" # # bootargs: don't change unless you know what you are doing # machargs: set to "-v" to get a verbose startup # #prom_env_bootargs = "" prom_env_machargs = "" # # This is needed if you want to boot Mac OS X # prom_driver_graphic = "video.x" # This will adjust the position of the initial page table (don't change) #page_table_pa = 104857600 # # CPU Config # # Processor Version Register # Defaults to 0x00088302 # Only change if you know want you are doing # #cpu_pvr = 0x00088302 # # Main memory (default 128 MiB) # must be >= 64 MiB # #memory_size=0x8000000 # # IO Devices # # # PCI IDE Config # # Drive type will be set according to file extension: # .img: Harddisk (filesize must be multiple of 516096) # .iso: CD-Rom # Or you can override this by specifying the type via # pci_ide0_master_type / pci_ide0_slave_type pci_ide0_master_installed = 1 pci_ide0_master_image = "C:\PearHD\NewHD.img" #pci_ide0_master_type = "hd" pci_ide0_slave_installed = 1 #pci_ide0_slave_image = "c:\Pear\OSX.iso" pci_ide0_slave_image = "C:\Pear\OSX.iso" #pci_ide0_slave_image = "cdrom" pci_ide0_slave_type = "cdrom" # # Network (unavailable on windows) # pci_3c90x_installed = 0 pci_3c90x_mac = "FF:FE:BD:ED:83:E6" # # USB # pci_usb_installed = 1 # # NVRAM # nvram_file = "nvram" Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2137201 Share on other sites More sharing options...
Impulfusion Posted May 20, 2004 Share Posted May 20, 2004 Still not working Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2137236 Share on other sites More sharing options...
Emon Posted May 20, 2004 Author Share Posted May 20, 2004 Yes... Here it is: # PearPC Configuration File # # Resolution # # 0: 640x480x8 (indexed) # 1: 640x480x15 # 2: 640x480x32 # 3: 800x600x8 (indexed) # 4: 800x600x15 # 5: 800x600x32 # 6: 1024x768x8 (indexed) # 7: 1024x768x15 # 8: 1024x768x32 # # The indexed modes are unsupported. # # default: 4 ppc_start_resolution = 4 # # Redraw interval (in ms) # must be between 1 and 999 # # If you set this higher, PearPC will spend less time doing redraws (and so run faster) # but feel less responsive. You should adjust this to your computer speed and personal # preference. # redraw_interval_msec = 200 # # Loader # # # Boot method # ? this can be # ? 1. "auto", prom will boot the first bootable partition found (default) # ? 2. "select", prom will show you a list of bootable partitions # ? 3. "force", prom will load and boot the local file prom_loadfile # prom_bootmethod = "auto" # Example of how to use "force": #prom_bootmethod = "force" #prom_loadfile = "test/yaboot" #prom_env_bootpath = "disk" # # bootargs: don't change unless you know what you are doing # machargs: set to "-v" to get a verbose startup # #prom_env_bootargs = "" prom_env_machargs = "-v" # # This is needed if you want to boot Mac OS X # prom_driver_graphic = "C:\Documents and Settings\Impulfusion\Desktop\pearpc\video.x" # This will adjust the position of the initial page table (don't change) #page_table_pa = 104857600 # # CPU Config # # Processor Version Register # Defaults to 0x00088302 # Only change if you know want you are doing # #cpu_pvr = 0x00088302 # # Main memory (default 128 MiB) # must be >= 128 MiB # #memory_size=0x8000000 # # IO Devices # # # PCI IDE Config # # Drive type will be set according to file extension: # ?.img: Harddisk (filesize must be multiple of 516096) # ?.iso: CD-Rom # Or you can override this by specifying the type via # pci_ide0_master_type / pci_ide0_slave_type pci_ide0_master_installed = 1 pci_ide0_master_image = "C:\Documents and Settings\Impulfusion\Desktop\pearpc\pearpc-6gib.img" #pci_ide0_master_type = "hd" pci_ide0_slave_installed = 1 pci_ide0_slave_image = "c:\macosx.iso" #pci_ide0_slave_image = "/dev/cdrom" pci_ide0_slave_type = "cdrom" # # Network (unavailable on windows) # pci_3c90x_installed = 0 pci_3c90x_mac = "de:ad:ca:fe:12:34" # # USB # pci_usb_installed = 1 # # NVRAM # nvram_file = "nvram" you will be better off putting the pearpc folder in your root directory .. (i.e. C:\ ) I dont think it likes spaces in between directory name .. for example "Documents and settings" Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2137333 Share on other sites More sharing options...
Emon Posted May 20, 2004 Author Share Posted May 20, 2004 Yes... Here it is: # PearPC Configuration File # # Resolution # # 0: 640x480x8 (indexed) # 1: 640x480x15 # 2: 640x480x32 # 3: 800x600x8 (indexed) # 4: 800x600x15 # 5: 800x600x32 # 6: 1024x768x8 (indexed) # 7: 1024x768x15 # 8: 1024x768x32 # # The indexed modes are unsupported. # # default: 4 ppc_start_resolution = 4 # # Redraw interval (in ms) # must be between 1 and 999 # # If you set this higher, PearPC will spend less time doing redraws (and so run faster) # but feel less responsive. You should adjust this to your computer speed and personal # preference. # redraw_interval_msec = 200 # # Loader # # # Boot method # ? this can be # ? 1. "auto", prom will boot the first bootable partition found (default) # ? 2. "select", prom will show you a list of bootable partitions # ? 3. "force", prom will load and boot the local file prom_loadfile # prom_bootmethod = "auto" # Example of how to use "force": #prom_bootmethod = "force" #prom_loadfile = "test/yaboot" #prom_env_bootpath = "disk" # # bootargs: don't change unless you know what you are doing # machargs: set to "-v" to get a verbose startup # #prom_env_bootargs = "" prom_env_machargs = "-v" # # This is needed if you want to boot Mac OS X # prom_driver_graphic = "C:\Documents and Settings\Impulfusion\Desktop\pearpc\video.x" # This will adjust the position of the initial page table (don't change) #page_table_pa = 104857600 # # CPU Config # # Processor Version Register # Defaults to 0x00088302 # Only change if you know want you are doing # #cpu_pvr = 0x00088302 # # Main memory (default 128 MiB) # must be >= 128 MiB # #memory_size=0x8000000 # # IO Devices # # # PCI IDE Config # # Drive type will be set according to file extension: # ?.img: Harddisk (filesize must be multiple of 516096) # ?.iso: CD-Rom # Or you can override this by specifying the type via # pci_ide0_master_type / pci_ide0_slave_type pci_ide0_master_installed = 1 pci_ide0_master_image = "C:\Documents and Settings\Impulfusion\Desktop\pearpc\pearpc-6gib.img" #pci_ide0_master_type = "hd" pci_ide0_slave_installed = 1 pci_ide0_slave_image = "c:\macosx.iso" #pci_ide0_slave_image = "/dev/cdrom" pci_ide0_slave_type = "cdrom" # # Network (unavailable on windows) # pci_3c90x_installed = 0 pci_3c90x_mac = "de:ad:ca:fe:12:34" # # USB # pci_usb_installed = 1 # # NVRAM # nvram_file = "nvram" you will be better off putting the pearpc folder in your root directory .. (i.e. C:\ ) I dont think it likes spaces in between directory name .. for example "Documents and settings" Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2137335 Share on other sites More sharing options...
Nard Posted May 20, 2004 Share Posted May 20, 2004 whoops Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2137383 Share on other sites More sharing options...
Emon Posted May 20, 2004 Author Share Posted May 20, 2004 As some of you are having problem rebooting into OS X after step 13 .. I am updating my guide with workarounds for that ..updated guide will be up soon .. give me few hours :p .. I am installing Gentoo 2004.0 ATM in my pc .. :) Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2137442 Share on other sites More sharing options...
emel Posted May 20, 2004 Share Posted May 20, 2004 Well... i have a MX700 Logitech mouse, on USB an it works. :yes: it works but I can only move it to downwards not side and whether I move it to left or right it only goes down. :no: Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2137668 Share on other sites More sharing options...
fahad Posted May 21, 2004 Share Posted May 21, 2004 it works but I can only move it to downwards not side and whether I move it to left or right it only goes down. :no: works fine for me Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2137741 Share on other sites More sharing options...
_I am Reptar Posted May 21, 2004 Share Posted May 21, 2004 i cant wait to try this Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2137817 Share on other sites More sharing options...
Emon Posted May 21, 2004 Author Share Posted May 21, 2004 Whoever is having booting problem after installation ...check out the updated guide. http://s87840517.onlinehome.us/pearpc.html Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2138876 Share on other sites More sharing options...
plainold Posted May 21, 2004 Share Posted May 21, 2004 thank you very much Emon, for the great guide : Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2139165 Share on other sites More sharing options...
insanekiwi Posted May 21, 2004 Share Posted May 21, 2004 this is my config: # PearPC Configuration File # # Resolution # # 0: 640x480x8 (indexed) # 1: 640x480x15 # 2: 640x480x32 # 3: 800x600x8 (indexed) # 4: 800x600x15 # 5: 800x600x32 # 6: 1024x768x8 (indexed) # 7: 1024x768x15 # 8: 1024x768x32 # # The indexed modes are unsupported. # # default: 4 ppc_start_resolution = 4 # # Redraw interval (in ms) # must be between 1 and 999 # # If you set this higher, PearPC will spend less time doing redraws (and so run faster) # but feel less responsive. You should adjust this to your computer speed and personal # preference. # redraw_interval_msec = 200 # # Loader # # # Boot method # this can be # 1. "auto", prom will boot the first bootable partition found (default) # 2. "select", prom will show you a list of bootable partitions # 3. "force", prom will load and boot the local file prom_loadfile # prom_bootmethod = "auto" # Example of how to use "force": #prom_bootmethod = "force" #prom_loadfile = "test/yaboot" #prom_env_bootpath = "disk" # # bootargs: don't change unless you know what you are doing # machargs: set to "-v" to get a verbose startup # #prom_env_bootargs = "" #prom_env_machargs = "-v" # # This is needed if you want to boot Mac OS X # prom_driver_graphic = "E:\temp\pearpc\pearpc-0.1.2-win32-jitc\video.x" # This will adjust the position of the initial page table (don't change) #page_table_pa = 104857600 # # CPU Config # # Processor Version Register # Defaults to 0x00088302 # Only change if you know want you are doing # #cpu_pvr = 0x00088302 # # Main memory (default 128 MiB) # must be >= 64 MiB # #memory_size=0x8000000 # # IO Devices # # # PCI IDE Config # # Drive type will be set according to file extension: # .img: Harddisk (filesize must be multiple of 516096) # .iso: CD-Rom # Or you can override this by specifying the type via # pci_ide0_master_type / pci_ide0_slave_type pci_ide0_master_installed = 1 pci_ide0_master_image = "E:\temp\pearpc\HD-OS-X-Panther-PREP.img" #pci_ide0_master_type = "hd" pci_ide0_slave_installed = 1 pci_ide0_slave_image = "E:\temp\pearpc\iso\OSX_CD1.iso" #pci_ide0_slave_image = "/dev/cdrom" pci_ide0_slave_type = "cdrom" # # Network (unavailable on windows) # pci_3c90x_installed = 0 pci_3c90x_mac = "de:ad:ca:fe:12:34" # # USB # pci_usb_installed = 1 # # NVRAM # nvram_file = "E:\temp\pearpc\pearpc-0.1.2-win32-jitc\nvram" yet it tells me there was no bootable partition found :( Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2139283 Share on other sites More sharing options...
ahfunaki Posted May 21, 2004 Share Posted May 21, 2004 whats up with this? Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2139420 Share on other sites More sharing options...
plainold Posted May 21, 2004 Share Posted May 21, 2004 yet it tells me there was no bootable partition found :( heres what you have to do ;) Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2139447 Share on other sites More sharing options...
insanekiwi Posted May 21, 2004 Share Posted May 21, 2004 well pojo. i did that. and still it tells me there's 0 bootable paritions. here my config again: # PearPC Configuration File # # Resolution # # 0: 640x480x8 (indexed) # 1: 640x480x15 # 2: 640x480x32 # 3: 800x600x8 (indexed) # 4: 800x600x15 # 5: 800x600x32 # 6: 1024x768x8 (indexed) # 7: 1024x768x15 # 8: 1024x768x32 # # The indexed modes are unsupported. # # default: 4 ppc_start_resolution = 4 # # Redraw interval (in ms) # must be between 1 and 999 # # If you set this higher, PearPC will spend less time doing redraws (and so run faster) # but feel less responsive. You should adjust this to your computer speed and personal # preference. # redraw_interval_msec = 200 # # Loader # # # Boot method # this can be # 1. "auto", prom will boot the first bootable partition found (default) # 2. "select", prom will show you a list of bootable partitions # 3. "force", prom will load and boot the local file prom_loadfile # prom_bootmethod = "auto" # Example of how to use "force": #prom_bootmethod = "force" #prom_loadfile = "test/yaboot" #prom_env_bootpath = "disk" # # bootargs: don't change unless you know what you are doing # machargs: set to "-v" to get a verbose startup # #prom_env_bootargs = "" #prom_env_machargs = "-s" prom_env_machargs = "" # # This is needed if you want to boot Mac OS X # prom_driver_graphic = "E:\temp\pearpc\pearpc-0.1.2-win32-jitc\video.x" # This will adjust the position of the initial page table (don't change) #page_table_pa = 104857600 # # CPU Config # # Processor Version Register # Defaults to 0x00088302 # Only change if you know want you are doing # #cpu_pvr = 0x00088302 # # Main memory (default 128 MiB) # must be >= 64 MiB # #memory_size=0x8000000 # # IO Devices # # # PCI IDE Config # # Drive type will be set according to file extension: # .img: Harddisk (filesize must be multiple of 516096) # .iso: CD-Rom # Or you can override this by specifying the type via # pci_ide0_master_type / pci_ide0_slave_type pci_ide0_master_installed = 1 pci_ide0_master_image = "E:\temp\pearpc\HD-OS-X-Panther-PREP.img" #pci_ide0_master_type = "hd" pci_ide0_slave_installed = 1 pci_ide0_slave_image = "E:\temp\pearpc\iso\OSX_CD1.iso" #pci_ide0_slave_image = "/dev/cdrom" pci_ide0_slave_type = "cdrom" # # Network (unavailable on windows) # pci_3c90x_installed = 0 pci_3c90x_mac = "de:ad:ca:fe:12:34" # # USB # pci_usb_installed = 1 # # NVRAM # nvram_file = "E:\temp\pearpc\pearpc-0.1.2-win32-jitc\nvram" Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2139465 Share on other sites More sharing options...
plainold Posted May 21, 2004 Share Posted May 21, 2004 thats weird, you sure you put the partitions in right order? #:type name lenght( size ) 1:Apple_partition_map Apple63 @ 1 2:Apple_HFS Apple_HFS_Untitled_2 602870 @ 262208 (2.9G) 3:Apple_Freebsp0+@ 64 4:Apple_Free0 +@ 6 290912 after this try to deslect you cd-rom before you boot! Link to comment https://www.neowin.net/forum/topic/167708-installing-os-x-102-on-a-pc/page/4/#findComment-2139539 Share on other sites More sharing options...
Recommended Posts