jaffa Posted January 5, 2004 Share Posted January 5, 2004 My rig: not the best, but hey it's al a poor student like me can afford :p ABIT NF7-S v2.0 AMD Thorton 2000+ @ 2121MHz (202*10.5) @ 1.7V Corsair XMS3200 512MB @ 404MHz @ 2-2-2-11 @ 2.9V Hercules Radeon 9600PRO 128MB @ 501GPU/345MEM so that's about it for the overclocks.. atm :devil: rest of my system not that important.. 40GB Maxtor 7.2K HDD & 160GB Samsung Spinpoint 7.2K SATA HDD. processor should go higher.. but it's running a bit hot on air now.. about 47 celsius.. I prefer about 45. But hey that's why im gonna buy watercooling when i have the money :ninja: :shifty: this motherboard overlcocks good.. my Athlon XP 1700+ did 2400MHz in it :devil: .. to bad it died :cry: Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1556853 Share on other sites More sharing options...
Samoa Posted January 5, 2004 Share Posted January 5, 2004 YOu should've gotten a 2500 Barton... :yes: Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1557275 Share on other sites More sharing options...
jaffa Posted January 5, 2004 Share Posted January 5, 2004 YOu should've gotten a 2500 Barton... :yes: nah i had a thight bugdet at that time :( .. my xp1700 was just 4 months old. so iwent for the thorton.. it's a downgraded barton and i succesfully unlocked the extra 256kb cache! so it's a barton infact :devil: .. it's works @200*10.5 so infact it's a Barton 3100+ :shifty: :whistle: Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1557345 Share on other sites More sharing options...
pmh Posted January 5, 2004 Share Posted January 5, 2004 How did you unlock it?!?!!? Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1557364 Share on other sites More sharing options...
LordHatrus Posted January 5, 2004 Share Posted January 5, 2004 Asus P4G8X Deluxe Intel P4, 2.4 Ghz (B version, not the 800FSB C version)... usually @2.9 Ghz, though I've taken it up to 3.4 Ghz, at 1.6 someodd volts ATI 9700 All-in-Wonder Pro w/324 memory clock, and pretty much any core clock :yes: Dual Channel DDR (2x256mb) but unfortunately they're 2700 speed.... yeuch.... will change that soon.... think 2-2-2-16. CPU runs a bit warm (70-someodd degrees when its really working for a few hours) but I'm getting a ThermalTek CPU heatsink in a few days. :) Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1557496 Share on other sites More sharing options...
psychoticDEMENTO Posted January 6, 2004 Share Posted January 6, 2004 i overclocked my toaster to toast a piece of bread into burtness in under 13 seconds. i would post pics...but dont have a camera. :/ Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1559876 Share on other sites More sharing options...
jaffa Posted January 6, 2004 Share Posted January 6, 2004 How did you unlock it?!?!!? i didn't do it myself. just asked the retailer to do it for me and he did :blush: :p i got big hands and can't fumble aroud with the small things.. hehe but hey. if i m not mistaken. it's the L2 bridge that you need to close. .. aha found the article: http://www.xbitlabs.com/news/cpu/display/20030930171549.html check it out and hopefully yours wil also succeed.. not all succed so keep that in mind. if it does, then you just got jourself a Barton at a pretty low price :devil: Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1560196 Share on other sites More sharing options...
Infinitiefx Posted January 9, 2004 Share Posted January 9, 2004 heres mine http://www.zen30133.zen.co.uk/cpu.jpg http://www.zen30133.zen.co.uk/memory.jpg Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1574966 Share on other sites More sharing options...
SpikePringlesBro Posted January 15, 2004 Share Posted January 15, 2004 i have my 1700+ Tbred B (1.43Ghz) oc'd to 2400+ (2.0Ghz) on a pants old MSI 745 Ultra mobo at 333Mhz fsb :D runs stable as hell, about 40 idle, about 47 loaded. i'm using a pants coolermaster hsf system, it's just a small aluminium heatsink with a 60 or 70mm fan. bit of a shame my 9200SE sucks buttocks though :crazy: i have to correct myself, 2.00Ghz is a 2800+, and i'm overclocked to that. i bought a new coolermaster CP5-blablabla silent HSF which supports up to 3200+, and i'm getting 31 idle and about 37 full load with Arctic Silver 3 :D :D :D bit of a shame my motherboard is shagged though, MSI-6561, it's really old and busted, started to crash my pc regularly :( new mobo soon - Pc Chips m848ALU or sumthin like that, it's cheap, but really good :p i hope it overclocks well Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1604321 Share on other sites More sharing options...
Inertia Posted January 15, 2004 Share Posted January 15, 2004 Just upgrade dmy motherbaord to the Nforce2 ultra 400 powered Gigabyte GA-7N400 This is my overclock using default multiplier (13x) with a FSB of 187mhz (chip speed 2.44ghz) Pretty impressive board, seeing as my last baord wouldnt budge pas a FSB of 179. The chip sits hapily at 41deg c idle and 50 deg c under constant load for 10 loops of sisofts burnin test. I havent seen it go over 47 Deg C yet in general use. I olso overclocked my FSB to 400mhz dropping the multiplier to 11x giving my CPU a speed of 2.19ghz, I wasnt too impressed with performance liek this thoguh, but i cant decide which way to go, CPU power or higher FSB (higher FSB also = higher Cas LAtency on my RAM) /edit - BTW my chip is a Tbred B 2700+ Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1604519 Share on other sites More sharing options...
fAlCoNNiAn Posted January 25, 2004 Share Posted January 25, 2004 P4 2.0 Ghz @ 2.7 ( i think i can get it to 2.8) default voltage amd 1900+ @ 1.8 and other pre-pentium II cpus, not importent. Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1649528 Share on other sites More sharing options...
Gums Posted January 26, 2004 Share Posted January 26, 2004 2500+ barton (1.8ghz) at 2.3ghz 40degC idle and 45degC under load ambient temp 25degC cooled with a Thermalright SLK-900 and a 92mm panaflo silent fan :) Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1653050 Share on other sites More sharing options...
Premgenius Posted January 26, 2004 Share Posted January 26, 2004 Never had any over clocks dont have any over clocks will not have any over clocks Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1653064 Share on other sites More sharing options...
tagerd0g Posted January 26, 2004 Share Posted January 26, 2004 pentium4 celeron 2.0GHz/400Mhz FSB overclocked to 2.66GHz/533Mhz FSB. i had no need to really change anything because when I booted up, the BIOS set the FSB to 533Mhz as the default. :D The CPU is cooled with the retail shipped heatsink and fan. I've got a stick of 512MB PC333 stuck in here. The mobo is an Asus P4S533MX (microatx). it sits idle around 30C and underload it gets around 45C Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1653097 Share on other sites More sharing options...
fAlCoNNiAn Posted January 26, 2004 Share Posted January 26, 2004 Never had any over clocksdont have any over clocks will not have any over clocks Then why do you post in here? :rolleyes: Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1653843 Share on other sites More sharing options...
TKC Posted January 27, 2004 Share Posted January 27, 2004 I currently have a 2800+ running at 2.2ghz(11x200) @1.725V with a crappy powersupply. Whats are the best settings interms of multiplier, fsb and voltage. I have a vantec AERO FLOW VA4-C7040, Which keeps the temps around 38 degrees idle an no more than 43 degrees full load. I think I can achieve cooler temps as this is my second time building a computer and the firts time applying AC3 and I think I might have applied the thermal compound incorrectly. So I'm planning on reinstalling the heat sink. The computer seems pretty stable the memory (geil 512mb ddr400 6-3-3-3) is currently at 400mhz and i have had no crashes or blue screens although I am worried about the power supply crapping out. I will definately be getting an antec truepower above 400W. Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1656588 Share on other sites More sharing options...
eXclusive Posted January 27, 2004 Share Posted January 27, 2004 2.4 OCed to 3.0 GHz Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1656602 Share on other sites More sharing options...
uniacid Posted January 27, 2004 Share Posted January 27, 2004 I've overclocked my 2.0Ghz Celeron to 2.6 :D, had PC3200 ram, I now got a P4 3.0 Ghz C and I'll start overclocking that :) :fro: Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1656603 Share on other sites More sharing options...
smm5786 Posted January 27, 2004 Share Posted January 27, 2004 P4 1.8A to 2.4GHz P4 2.26B to 2.82GHz P4 2.6C to 3.25GHz Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1656639 Share on other sites More sharing options...
gotrootdude Posted January 28, 2004 Share Posted January 28, 2004 1- 1700+ @ 2257.5mhz 1- 1800+ @ 2050mhz 1- 1700+ @ 2000mhz 1- 1700+ @ 2467.5mhz 1- 900mhz @ 900mhz Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1661220 Share on other sites More sharing options...
zeezz Posted January 29, 2004 Share Posted January 29, 2004 P4 2.8C to 3.5 (5:4 divider) Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1664073 Share on other sites More sharing options...
dummyusername Posted January 30, 2004 Share Posted January 30, 2004 :devil: Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1668711 Share on other sites More sharing options...
uniacid Posted January 30, 2004 Share Posted January 30, 2004 This is my Celeron 2Ghz @ 2.6Ghz :D and this is my new P4 3Ghz @ 3.3Ghz Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1668726 Share on other sites More sharing options...
isus Posted January 30, 2004 Share Posted January 30, 2004 look at my sig :) Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1668735 Share on other sites More sharing options...
Samoa Posted January 31, 2004 Share Posted January 31, 2004 (edited) look at my sig :) Good job (Y) my specs 2.27ghz 433FSB, 1.75v :D That's my 2800 Barton (2.08ghz 333FSB) on MSI KT6 Delta-LSR, with Kingston PC3500 DDR. Edited January 31, 2004 by Samoa Link to comment https://www.neowin.net/forum/topic/50448-list-your-overclocks/page/13/#findComment-1673267 Share on other sites More sharing options...
Recommended Posts