CAPSLOCKISAWSOME Posted May 15, 2010 Share Posted May 15, 2010 My problem is as follows: When I boot up my computer with with my primary hard drive (containing my OS) connected, it boots fine. When I connect a second hard drive (which just contains data), it show "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER". I've used both hard drives with each other for the past year or so with no problem, but when I turned on my computer this morning, the problem occurred. Both hard drives are SATA and it doesn't look like there is any way to change a jumper to indicate slave/master drives like there is with ATA. any ideas as to what could be causing this is appreciated. thanks. Link to comment https://www.neowin.net/forum/topic/901458-my-second-hard-drive-causes-disk-boot-failure/ Share on other sites More sharing options...
Jamushroom Veteran Posted May 15, 2010 Veteran Share Posted May 15, 2010 Can't you make a choice of which the bootable drive is in the BIOS? Link to comment https://www.neowin.net/forum/topic/901458-my-second-hard-drive-causes-disk-boot-failure/#findComment-592627734 Share on other sites More sharing options...
dragon2611 Posted May 15, 2010 Share Posted May 15, 2010 Can't you make a choice of which the bootable drive is in the BIOS? Or if that isn't possible swapping the cables round might help. Link to comment https://www.neowin.net/forum/topic/901458-my-second-hard-drive-causes-disk-boot-failure/#findComment-592627764 Share on other sites More sharing options...
CAPSLOCKISAWSOME Posted May 15, 2010 Author Share Posted May 15, 2010 Can't you make a choice of which the bootable drive is in the BIOS? When I plug in my second hard drive, my first hard drive doesn't appear in the list of available drives. I'll try swapping cables maybe that'll help Link to comment https://www.neowin.net/forum/topic/901458-my-second-hard-drive-causes-disk-boot-failure/#findComment-592627834 Share on other sites More sharing options...
CAPSLOCKISAWSOME Posted May 15, 2010 Author Share Posted May 15, 2010 ok I swapped cables around and .... nothing. One thing that I noticed this time is that the hard drive makes a sound when its plugged in. Its kind of like a chirping sound. This made me nervous that the hard drive might have failed or might be failing. To try to save it, I booted up spinrite. Unfortunately it wasn't able to detect the hard drive (I unplugged my working hard drive and all that it detected was my floppy drive). Did this hard drive fail? or is there still hope. Link to comment https://www.neowin.net/forum/topic/901458-my-second-hard-drive-causes-disk-boot-failure/#findComment-592627916 Share on other sites More sharing options...
stockwiz Posted May 16, 2010 Share Posted May 16, 2010 your bios is probably putting that drive you insert first in your list of drives to boot with.. you need to go into the bios and change the drive order around to make sure the drive with your boot data is the drive at the top of the list, and not your data drive that you insert. Edit: Nevermind. Should have read more of the replies. Strange that both drives don't show up. In my bios there are two seperate screens.. once lists boot device priority (drive, CD-rom, etc) the other lists drive priority. Make sure you checked both. If you are on the screen with boot device priority, the drive that is at the top of the list will be the only one listed there. To get a different drive there, you have to swap around the drives in the drive order section. Link to comment https://www.neowin.net/forum/topic/901458-my-second-hard-drive-causes-disk-boot-failure/#findComment-592628722 Share on other sites More sharing options...
TEX4S Posted May 16, 2010 Share Posted May 16, 2010 I think what you need to do 1st is either get a USB/SATA HDD adaptor or a HDD Docking station. Run Hiren's or Bart's PE, or any other mini-XP environment and get your valuable data off of it. Worry about the other stuff AFTER you have your data backed-up. As far as an answer to your question, have you tried every SATA port ? Also, have you reset your BIOS to default or checked for a BIOS update ? I think you need to: 1.) Get your personal data off of the drive (music, emails, pics, movies, docs) 2.) See if there is a BIOS update, if so - flash it 3.) Set BIOS to default 4.) Try other SATA ports 5.) Get a new mobo and possibly a new HDD ;( CAPSLOCKISAWESOMEBTW Link to comment https://www.neowin.net/forum/topic/901458-my-second-hard-drive-causes-disk-boot-failure/#findComment-592628892 Share on other sites More sharing options...
Recommended Posts